Vrei sa te Loghezi sau sa te Inregistrezi
CHAT | MESSENGER | ADAUGA BOOKMARK | GHID ASISTENTA | LIMBA:
 

JURNALE   SCRIE JURNAL   MODIFICA JURNALE  
 
RSS
Kitchen Faucets Manufacturers Share The Process Of Disassembling The Faucet
Adaugat pe 15/05/2019 10:32:59 de afastainlesskb
Don't look at the faucet is a small object. Once there is a
problem, many people will not properly disassemble and repair the faucet. So
today, the kitchen faucets manufacturers will tell you how
to properly disassemble and repair the faucet.

The disassembly procedure
is:
1. Turn off the main switch. Find the red and blue dots under the handle.
When you open it by hand, a small hole is revealed.

Second, observe the
hole in the hole by hand, and see if a fixing screw is a cross or a word, use a
corresponding screwdriver to loosen it. The screw of a few brands is the inner
square hole, which is more troublesome. When there is no tool, be careful not to
damage the screw port with other alternative tools that can be
removed.

3. When you loosen the screw, you can remove the
handle.

4. At this time, you can see a large copper nut. After removing
the nut with a large movable wrench, you can remove the spool of the
faucet.

5. Observe whether the copper plane under the valve core is
uneven or has fine sand particles and clean it. Remove the rubber seal on the
flat surface to see if it is damaged.

Sixth, in general, the hot and cold
faucet has good integrity and high reliability. Therefore, after opening, often
no obvious problem can be found. At this time, it is just a change of the spool.
The spool price ranges from 10-40 yuan.

Tag-uri: kitchen faucets manufacturers





Site in reteaua NewAge NETWORK | Gazduire: NetSONIC | Dezvoltare WEB: NewAge MEDIA
Cea mai buna oferta de
internet | Internet Sector 1, Sector 6, Grivita, 1Mai, Ion MihalacheHitStation.Ro - Muzica noua actualizata zilnic

Jocuri Barbie Galerie foto - Roportal Adauga site in top online Linkuri impartite pe categorii