Vrei sa te Loghezi sau sa te Inregistrezi
CHAT | MESSENGER | ADAUGA BOOKMARK | GHID ASISTENTA | LIMBA:
 

JURNALE   SCRIE JURNAL   MODIFICA JURNALE  
 
RSS
Use And Adjustment Of Corn Thresher
Adaugat pe 01/07/2020 05:38:37 de hongxiangseeder

The
wheat planter is an important tool in the implementation of protective tillage
mechanization technology. It can complete multiple procedures such as stubble
stubble, ditching, fertilization, seeding, soil covering, and suppression at one
time, reducing the crushing damage of the machine to the soil, saving labor.
Save time, save fertilizer and oil, increase production and income, and protect
the environment. Whether the machine can be properly controlled and used will
directly affect its function. In order to help the majority of farmers to
correctly grasp the use characteristics of the machine and give full play to its
high efficiency, the installation, adjustment and common use of the wheat
no-till
Seed
Planter
 The
troubleshooting methods and operation notes are introduced as
follows:

1.
Installation of equipment

1.
Installation of rotating tool. Each group of rotary cutters is composed of four
left and right curved blades and two straight blades in the middle. During
installation, the machete should be bent inwards with a center distance of 8cm
and 16cm, and a straight knife with a center distance of 6cm. The rotating
direction of the rotating blade shaft assembly is the same as the rotating
direction of the tractor tire, so as to ensure that the blade edge enters the
soil first. During the operation, the straight knife cuts the long straw, and
the left and right machete throw the straw between the ridges. There is
basically no long straw in the wheat ditch, which creates good conditions for
wheat growth and development.

2.
Installation of fertilizer and seed openers. During installation, it is required
that the fertilization opener is in front and the seeding opener is in front and
back, and the u-shaped card is fixed on the crossbeam with bolts. Adjust its up
and down position according to agronomic requirements to ensure the depth of
sowing and fertilization. Generally, the sowing depth is 3-4cm, and the depth of
fertilization is 5cm below the seeds.

3.
Installation of universal joint. The two ends of the universal joint have two
different internal splines. Among them, the 8-38x32x6 internal spline is
connected to the tractor's power output shaft external spline, and the 8-42x42x8
internal spline is connected to the machine's power input shaft. After
installation, the two splined forks should be in the same plane.

Second,
use and adjustment

1.
Preparation and adjustment before operation

(1)
Tightening and oil filling. Before using the machine, check the fastening parts
and check whether the rotating parts are flexible. Fill the chain drive and
other rotating parts with lubricant.

(2)
Use of seeding (fat) device. The wheat no-tillage planter uses a semi-precision
external groove wheel seeder. The sowing plate is drawn out during sowing. After
sowing, the seeds are cleaned and pushed into the sowing plate.

(3)
The limit of the suppression wheel. In the transportation state, the rocker arms
on both sides of the suppression wheel are fixed by the two upper and lower
limit pins on the fan-shaped plate; the upper limit pin must be released during
the operation and placed in the appropriate hole on the fan-shaped
plate.

(4)
Adjustment of seeding (fat) device. Coarse adjustment: Loosen and adjust the
lock nut of the hand wheel to make the ring gear withdraw from the meshing
position, turn the seed volume adjustment hand wheel until the seed quantity
indicator reaches the predetermined position, and then lock the nut. Fine
adjustment: Suspend the suppressor wheel, rotate the suppressor wheel 10 times
at a constant speed according to the normal driving speed and direction, take
the seeds discharged from various tubes, weigh the weight of the seeds
discharged from each row of tube and the total weight of seeding, calculate the
Average seed volume and sowing volume per mu. When adjusting the sowing amount,
the seeds (or fertilizer) in the seeding (fertilizer) sheave should be cleaned
until it does not affect the movement of the sheave. In order to meet the
agronomic requirements, it should be carefully debugged repeatedly. After
adjusting, lock the nut.

(5)
Horizontal adjustment of the left and right and front and back of the implement.
Raise the implement, make the rotary knife and the opener leave the ground,
adjust the rear left and right diagonal rods of the tractor to keep the blade,
hook opener, and implement horizontal of the rotary knife; adjust the length of
the upper rod in the tractor suspension device to make planting Keep the machine
level front and back.

(7)
Check the rotation clearance of
Corn
Thresher
.
Before working, carefully check the relative position of the rotary knife and
the opener so that it does not collide.

Tag-uri: Seed Planter, Corn Thresher





Site in reteaua NewAge NETWORK | Gazduire: NetSONIC | Dezvoltare WEB: NewAge MEDIA
Cea mai buna oferta de
internet | Internet Sector 1, Sector 6, Grivita, 1Mai, Ion MihalacheHitStation.Ro - Muzica noua actualizata zilnic

Jocuri Barbie Galerie foto - Roportal Adauga site in top online Linkuri impartite pe categorii